Find What Fits Your Jeep
Details
Factory System Type
Amplified: You have an amplified system if you have a subwoofer in the back of your Jeep.
Non-Amplified: You have a non-amplified system if you do not have a subwoofer in the back of your Jeep.
Product Overview
9-inch Weather-Resistant Digital Media Receiver with Hi-Res Audio Playback for 2011-18 Jeep® Wrangler.
Features
- 9-inch HD Anti-Glare Display with Jeep® Specific Trim Bezel
- Weather-Resistant (Rated IP53)
- Plug-and-Play Installation
- Jeep® Specific Tuning
- Hi-Res Audio Playback (96kHz / 24bit)
- Wireless Hi-Res Audio (requires LDAC compatible device)
- Hi-Res music streaming with TIDAL (A TIDAL subscription is required and sold separately; Alpine Head Unit must be tethered to a mobile or smartphone hotspot; Data rates may apply)
- Apple Carplay® (Wired & Wireless)
- Android Auto™ (Wired & Wireless)
- The Google Assistant is Available on Android Auto™
- Bluetooth® Hands-Free
- SiriusXM-Ready® with 360L (requires SXV300 Tuner, sold separately; SiriusXM subscription required; Some 360L content and features require a Wi-Fi connection with internet access. Data rates may apply)
- Built-in HD Radio®
- Retain Factory Media Controls and Vehicle Info with included iDatalink Maestro module
- Alpine DVR-C320R Dash Cam Compatible (sold separately)
- Media Xpander®
What's Included
- 9" Touchscreen monitor
- Source unit
- Wiring harness (15A fuse)
- Preout harness
- iDatalink/Driver Recorder/Front Camera harness
- Camera input adapter harness
- Mic/SWC harness
- Microphone (w/ attached 12.5' cable terminated by a right-angle stereo-3.5mm connector)
- Surface-mount bracket
- Two-sided tape
- GPS antenna (attached 8' cable with proprietary connector)
- Self-adhesive mounting pad
- 3 Self-adhesive cable clamps
- Power-plate
- 2 Rear covers
- HDMI connector clamp
- 4 Pan-head ISO-screws (M5x8mm)
- 4 Counter-sunk ISO-screws (M5x8mm)
- 3 Display screws (M5x8mm)
- 2 Hinge screws (M3x4mm)
- 2 Rear cover screws (M2.6x6mm)
- 4 Rectangle self-adhesive sheets
- 4 Square self-adhesive sheets
- 2 Round self-adhesive sheets
- 2 Semi-oval self-adhesive sheets
- Quick Reference Guide
- Online Registration Information
- Online Detailed Manual Card
- iDatalink Maestro RR radio replacement interface module (ALP-MRR)
- Main harness
- Antenna adapter
- USB flashing cable
- SAT radio antenna adapter
- OBDII harness
- Power/ground harness
- Radio dash bezel
- 2 Side brackets
- 2 Display brackets
- Display/power key harness
- Installation Manual
- "Read Before Installation" Note. Online Registration sheet
- Warranty Information
Tech Specs
- Screen Size: 9”
- Screen Resolution: WXGA 1280 x 720px (720p HD)
- AUX Input: 1
- HDMI Input: 1
- HDMI Output: 1
- Camera Inputs: 2 Direct (1 Rear input, 1 input that can be set as Front, Side, or Other)
- Dash Cam Input: 1 (Works best with Alpine DVR-C320R- sold separately
- USB Inputs: (1 data, 1 charge only port)
- 4V Pre-Outs: 3
- Built-in Amplifier: 18W RMS x 4
- EQ: 13-Band Parametric (per channel)
- Time Correction: 6-Channel
- DAC: 24 Bit
- Crossover: High Pass / Low Pass
- Audio Playback: AAC, APE, FLAC, MP3, WMA, WAV
- Video Playback: AVC, FLV, H.264, MP4, MPEG-1, MPEG-2, MPEG-4, MKV, MOV